EN
5
The remote sensor reception icon will show the following
status:
ICON
DESCRIPTION
Main unit is
searching for
sensor(s).
A channel has
been found.
The sensor
cannot be found.
NOTE
The main unit will search only for already
registered sensor or new sensor reset within last 30
minutes. To register a new sensor, reset sensor prior
to search.
TIP
The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
SET UP MAIN UNIT
NOTE
Set up the remote sensor before installing the
main unit.
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
3. Press
RESET
after each battery change.
NOTE
Batteries should not be exposed to excessive
heat such as sunshine or fire.
WEATHER INFORMATION DISPLAy
REGIONAL WEATHER INFORMATION
NOTE
Due to timing of the transmission of weather data,
it may take up to 24 hours to get a valid signal.
Initial synchronisation with Meteo Time can take from 2 to
12 hours. If the weather forecast icons do not appear after
a long period of time, please reset the product and place
it next to a window or a place with less signal interference.
This unit displays the current and next 3-day* weather
information of a user-selected regional city.
indicates
strong signal reception of weather information.
* 4-day weather information (current and next 3-days) is
not available for all cities. Please refer to ‘Geographical
coverage’ addendum sheet for a list of cities and the
available forecasts for each city.
ICON
LOCATION
DESCRIPTION
Clock / Alarm /
Calendar /
Message area
Some cities’ data
are received
Today’s Weather /
Regional Weather
area
Data for the
selected city
received in the
past 48 hours
WMH90_M_EU_EN_R5.indd 5
11-7-27 下午4:56
P/N: 300100781-00004-10 REV 1
6/86
