GB
22
PC KIT
The Oregon Scientific OUTBREAKER sports watch is equipped
with a PC Kit that includes a PC Docking Station and CD-ROM
for downloading information to a personal computer. Full in-
structions for using the software are provided in the online help
and can be viewed once you have installed the CD-ROM.
The PC Kit enables you to store and recall most of the
information that is collected by the OUTBREAKER watch. This
allows you to free up the watch memory for recording more
information, while preserving the training records that are most
important to you. For example, with the PC Kit you can specify
which information you want to record in TOUR Mode: By
limiting what is recorded, you can keep longer records. This can
be useful if you wish to monitor your performance during an
extended period such as a two-day hike, where only heart rate
and altitude are of concern, or a day of cycling, where only
speed and distance are important to you. Full details of the
watch’s memory capacity are given in the USING THE TOUR
MODE section.
You can also use the PC Hook-up Kit to set values on the watch
through the PC. A full list of options is given at the end of this
section.
The hardware/software requirements for the PC Kit are
listed at the back of this manual.
ACCESSING BIKE MODE OPTIONS
Press MODE to access the BIKE Mode,
then press to loop through
the options: Bike speed/STW, Bike
speed/TTL (see TOUR Mode section),
and Bike speed/Clock.
For instructions on how to use the Stop-
watch or Timer in BIKE Mode, refer to
pp. 9 – 10.
VIEWING SPEED AND CADENCE INFORMATION
1. Press FUN/SET while in BIKE Mode to view Average speed/
Tour time. To view Maximum speed, TOUR distance, and
Total distance, press repeatedly.
2. Press FUN/SET again to view Cadence/STW. To view
Cadence/Clock, press .
3. Press FUN/SET a third time to view Average Cadence/
TOUR time. Press to view Max Cadence/Tour
time.
To clear a value from a specific memory, press and hold FUN/
SET for 2 seconds.
When finished press FUN/SET or wait 30 seconds to return to
the Speed/STW view.
NOTE
