EN
BABY MONITOR
This function can be used not only to monitor babies or handicapped
persons, but as well for acoustical monitoring of rooms. The function is
similar to VOX operation, but is especially adjusted for baby and sound
monitoring.
One radio is set to baby monitor mode, and another radio remains in
normal mode and is used to receive the transmissions of the baby¡¦s unit.
To activate one radio as baby monitor:
1. Press“ ”key 8 times, LCD display will show the “
Baby
” icon.
2. Press “ ” or “ ” key to monitor sensitivity level from 1 to 3 (low to high
level), OF is turn OFF this function.
3. Press”
PTT
” to confirm and quit.
4. Or press“ ”key once, the last selection will be confirmed and enter
into next function selection.
5. After turn on this function, LCD displays the “
Baby
”icon.
The roger beep function enables a short tone signal which is transmitted
after releasing the PTT button.
ROGER BEEP(ON/OFF)
1. Press“ ”key 9 times, the LCD will display “
Roger
” .
2. Press“ ” or “ ” key to turn on (display shows icon) or turn off
(display shows icon)
3. Press “
PTT
” to confirm and quit.
4. Or press“ ”key once, the last selection will be confirmed and enter
into next function selection.
5. After turning on roger beep, LCD will display the “
RGR
”
icon.
15
