EN
SSelect receiving volume in broadcast mode
Select receiving volume in broadcast mode
1. Press“ ”key once (in broadcast mode, this key toggles between
frequency setting and volume setting).
2. Press “ ” or “ ” to adjust the volume when listening to FM radio.
3. Press“ ”key again to exit volume setting and to return back to
frequency setting mode.
Priority of PMR 446 during broadcast mode
1. Even when your radio is in broadcast mode, the radio still monitors
the PMR 446 frequency range for received calls or signals. If an
incoming PMR 446 signal is detected, the unit will automatically switch
to PMR mode & you can listen to the PMR 446 transmissions.
2. If you do not press PTT to answer, the unit will auto switch back to FM
broadcast radio mode after the PMR 446 transmission finished.
3. If you press PTT key to transmit, the unit will exit the FM broadcast
radio mode & stay on PMR 446 mode now.
4. After finishing PMR communication, you can press “ ” 3 times
again to re-enter the FM broadcast mode again. The unit will then
receive on the last FM broadcast radio frequency you had selected
before.
CALL TONE
You can use Call Tones (melodies) to get the attention of other people
with radios on the same channel and CTCSS tone. You can also use
Call Tones as the signal of the start or end of a transmission.
1. Press “ ” key, LCD displays icon and your call tone will be
transmitted to nearby receivers set at the same channel.
2. There are 10 different call tones to choose from.
12
