Oregon Scientific Tap On Sport SE102N, Руководство пользователя

Страница: 29 / 36

E
N
BATTERIES
The product uses 2 x CR2032 batteries, one for the watch
and another for the chest belt. Both are already installed.
The battery warnings are:
DESCRIPTION
Continuous
flashing
The watch battery is low
Intermittent
flashing
The watch battery is too low to run the
backlight
“CHEST LO”
The chest belt battery is low. Replace
battery to ensure accurate readings.
*
The batteries typically last one year.
To replace the watch battery:
. Undo the screws and remove the back plate.
2. Using a thin blunt instrument, hook the release catch
and lift the clip.
3. Replace the old battery and then the battery clip.
4. Replace the back plate and screws.
To replace the chest belt battery:
. Using a coin, twist the battery door counter-clockwise
until it clicks out of place.
2. Replace the old battery and close the battery door by
twisting it clockwise until it is firmly in place.
IMPORTANT
• It is not recommended that you replace the watch battery
by yourself.
Our service center has authorized engineers to replace
battery and O-ring and also subject the watch to a
water proof test. We will not be responsible for product
guarantee should there be any quality problems
related to water leakage arising from improper battery
replacement.
• Non-rechargeable and rechargeable batteries must be
disposed of properly. For this purpose, special containers
are provided for non-rechargeable and rechargeable
battery disposal at communal collection
centers.
• Batteries are extremely dangerous when swallowed!
Therefore, keep batteries and the article away from
infants. If a battery has been swallowed seek immediate
medical advice.
• The batteries supplied must not be recharged,
reactivated by any other means, dismantled, put into fire
or short-circuited.