EN
9
TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold
DOWN
for 2 seconds. Then,
manually set the clock following the “Set Clock”
instructions (below).
SET CLOCK
You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
1.
Press and hold
MODE
for 2 seconds. The Clock
Area will blink.
2.
Select the offset hour, 12 / 24 hour format, hour,
minute, year, month, day, and language. Press
UP
or
DOWN
to change the setting. Press
MODE
to
confirm.
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish.
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF
SWITCH CLOCK DISPLAY
Press
MODE
to toggle between Clock with Seconds,
Clock with Weekday and Calendar, and Clock with Offset
Hour display.
ALARMS
This product has 2 alarms: a Single Alarm and a Weekday
Alarm. The Single Alarm can be set to go off at a specific
time for a one-time event (for example, if you are napping
on Saturday). The Weekday Alarm will sound at the same
time Monday - Friday (but not on weekends).
VIEW ALARM SETTINGS
Press
ALARM
to display the Alarm settings you wish to
view: Weekday
W
or Single
S
.
SET ALARM
1.
Press
ALARM
to display the type of Alarm you wish
to set: Weekday or Single.
2.
Press and hold
ALARM
for 2 seconds. The Alarm
settings will blink.
3.
Select the hour and minute. Press
UP
or
DOWN
to
change settings. Press
ALARM
to confirm.
NOTE
RMR613HGA lab test R2
1/17/04, 5:00 PM
9
