4
EN
BACK VIEW
DESCRIPTIONS
1.
Projector focus knob (
à
6)
2.
Projector (
à
6)
3.
Image rotation knob (
à
6)
4.
180° rotation (flip image) button (side) (
à
6)
5.
Projection on switch (
à
7)
6.
AC power adaptor jack (bottom
à
4)
7.
Battery compartment (
à
4)
AC power adapter not shown.
Reset button (located in battery compartment) not
shown.
GETTING STARTED
BATTERIES
Batteries are supplied with this product. Replace them
whenever the low battery signal ( ) displays. The battery
cover is located on the back of the unit. Slide to open. Be
sure to match the correct polarity, as shown in the battery
compartment. After you change the batteries, press the RESET
button with the point of a blunt object (such as a ball point
pen).
Do not use rechargeable batteries.
AC POWER ADAPTER
An AC power adapter is supplied for use with this product. You
must connect the power adapter if you wish to use the
continuous projection feature. The jack is located on the
bottom of the unit.
If the AC power becomes unavailable, the unit will
automatically switch to battery power.
CHANGE SETTINGS
Press and hold MODE or ALARM for 2 seconds to enter
setting mode. Then, press
UP or
DOWN to change
each setting. Press and hold to enter fast-setting mode. Press
MODE or ALARM to switch between settings.
1
2
3
4
5
6
7
