EN
12
For more information on the sensor see
"Remote Sensor THN122N" Section.
MINIMUM / MAXIMUM RECORDS
The
MEM
button is located in the main unit battery
compartment. Press
MEM
to toggle between current,
maximum (MAX) and minimum (MIN) records. To clear
the records, press and hold
MEM
for 2 seconds. A beep
will sound to confirm that the memory has been cleared.
RESET SYSTEM
The
RESET
button is located in the main unit battery
compartment. Press
RESET
when you change the
batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or Clock).
SAFETY & CARE
Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location.
WARNINGS
This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the device
from those specified in the user instructions or any
unapproved alterations or repairs of the product.
Observe the following guidelines:
• Never immerse the product in water. This can
cause electrical shock and damage the product.
• Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this
product.
• Remove the batteries if storing this product for a
long period of time.
• Do not scratch the LCD display.
The technical specification of this product and
contents of this user guide are subject to change without
notice. Images not drawn to scale.
NOTE
NOTE
RAR621 English R2
7/27/04, 12:21 AM
12
