EN
7
TO SET THE ALARM
ST/SP/+
SET
MODE
1. Press
MODE
to navigate to Clock mode.
2. Press
SET
to navigate to Alarm.
3. Press and hold
SET
to enter settings.
4. Press
ST / SP / +
to scroll upwards and
COMPASS /
-
to scroll downwards through the setting options. The
setting sequence is as follows: hour; minute.
5. Press
SET
to confirm.
To activate or deactivate the alarm:
• Press
MODE
to navigate to Clock mode.
• Press
SET
to navigate to Alarm and press
ST / SP / +
to
turn the alarm on or off.
will indicate that the alarm
has been activated.
• Press
SET
to confirm.
NOTE
When the alarm clock is activated, it will sound at
the set time every day. Press any button to stop the alarm
for that day. The alarm clock is still active and will set off
again the following day.
To silence the keys:
• Press
MODE
to navigate to Clock mode.
• Press
SET
to navigate to Beep
ON / OFF
.
• Press
ST / SP / +
to silence or to turn on key sounds.
COMPASS
ABOUT THE COMPASS
The compass shows the bearing of your position in degrees
due North. The outer circumference of the display consists
of 60 segments that graphically show your bearing. Three
lit segments represent South whereas one lit segment
represents North, as shown below.
1
２
３
４
５
1. South
2. Bearing
3. Stopwatch
4. Cardinal point
5. North
COMPASS AND CALIBRATION
Before the compass is first used, we recommend that you
calibrate the compass sensor.
To calibrate the compass sensor:
• Press
MODE
to navigate to the Set up mode.
RA126 IM EN R5.indd 7
2007.7.27 12:21:51 PM
