EN
6
set up mode:
Bearing Tracking
Calibration
True north
Declination
CLOCK MODE
TO SET THE TIME AND DATE
1. Press
MODE
to navigate to Clock mode.
2. Press
SET
to navigate to time and date.
3. Press and hold
SET
to enter settings.
4. Press
ST / SP / +
to scroll upwards and
COMPASS /
-
to scroll downwards through the setting options. The
setting sequence is as follows: 12 / 24-hour time; hour;
minute; year; day-month / month-day; month; day;
temperature unit.
5. Press
SET
to confirm.
NOTE
If no key is pressed for ten seconds, the display will
return to Clock mode.
STOPWATCH
SET
MODE
1. Press
MODE
to navigate to Compass mode.
2. Press
SET
to navigate to Compass with stopwatch.
3. Press
ST / SP / +
to start and stop the stopwatch.
4. Press and hold
SET
to reset.
NOTE
Unless you stop the stopwatch, “
” will blink in
all modes to remind you that the stopwatch is still timing.
To view Compass with temperature:
• Press
MODE
to navigate to Compass mode.
• Press
SET
to navigate to Compass with temperature.
NOTE
The compass display is active for 30 seconds at a
time. After this, the compass will go into power saving mode
and “- - -” will appear on the display.
To re-activate the compass, press
COMPASS
.
RA126 IM EN R5.indd 6
2007.7.27 12:21:49 PM
