Oregon Scientific OUTBREAKER RA201, Руководство пользователя

Страница: 21 / 22

21
GB
SECTION 8 :
TECHNICAL SPECIFICATION
CALENDAR CLOCK
Time : 12hr with am/pm indication
or 24hr
Date : MM.DD or DD.MM
Year : 2001 – 2099 (auto-calendar)
Zone time : (+)23 – (-)23 hours
Chronometer : 99:59:59 (hr:min:sec)
Alarm : 1 min daily alarm
No memory records
and bar graph for the
sea level pressure. (1) Battery has been
changed.
(2) The watch has been
reset.
(3) The sea level
pressure is inferior
to the lower limit of
the display range of
the bar graph.
(1-2) Leave the watch
for one hour till
the sea level
pressure starts to
update again.
(3) The display range
will be readjusted
for the next
updated.
Weather forecast
icon never changes.
The barometer changes
were covered by the
activities changes.
Reset the weather
forecast icon to match
with the current weather
in order to speed up the
response.
LAP memory is not
functioning in
TIMER 1.
(1) LAP memory is
full.
(2) Memory group
record is full.
Delete the memory
group(s) to release the
memory space for LAP
function.
TROUBLE POSSIBLE
CAUSE
REMEDY
The bar graph of the
sea level pressure
was kept at a high
level.
The sea level pressure
exceeds the upper limit
of the display range of
the bar graph.
The display range will
be readjusted for the
next update.
TROUBLE POSSIBLE
CAUSE
REMEDY
After changing the
unit of measurement,
the historical
readings of the sea
level memories were
shown constant. The watch displays
default values because
there were no updated
data captured. The sea level memories
will be resumed to the
memorized values once
the sea level pressure
has been updated.
Cannot start the
Timer in SAILING
TIMER mode.
TIMER 1, TIMER 2 or
TIMER 3 is running. Stop the running timer
and reset the TIMER.
Start the desired
TIMER accordingly.
Temperature shown
is higher than the
actual temperature.
The thermometer
detected the body heat
instead of the actual
temperature.
Take the watch off the
wrist of leave it on
open area for at least
15 minutes.
No key function when
key pressed. Key lock function has
been activated. Release the key lock
function.
No back light when
EL back light key is
pressed. Battery level is too low
to activate the backlight. Replace the old battery
with a new one.