16
GB
Use as a stopwatch:
1. Press ST/SP to start the stopwatch.
2. Press LAP to mark a lap memory.
3. Press ST/SP to stop the stopwatch.
4. Press and hold SET for two seconds to reset the stopwatch.
Use as a countdown timer:
1. Press and hold SET for two seconds to set the time for the
countdown timer.
2. Press SET to toggle between hour, minute and second setting.
3. Press +/- to increase or decrease the values.
4. Press SET to confirm the setting and toggle to next field.
5. Press ST/SP to start or stop the chronometer in clock-chronometer
display after setting.
6. Press and hold SET for two seconds to reset the timer.
Refer to Fig. 5b for TIMER 1 operation.
Notes:
a) When countdown time reaches the last 5 minutes to last minute,
short double beeping sound every minute.
b) At every 10 seconds during the last minute, there will be a short
double beeping sound.
c) At every second during the last ten seconds, there will be a short
beeping sound.
d) At the completion of the countdown, there will be a long beeping
sound for indication.
e) After completion of the countdown it will automatically activate
the stopwatch.
f) The maximum countdown time and stopwatch range will be
99:59:59.
g) The set time will be resumed after the timer is stopped and reset.
h) There are a total of 99 memory groups for the stopwatch; to be
used between a maximum of 99 memory groups or a maximum
of 99 lap memories or a combination of both.
i) While the stopwatch is working, every press on ST/SP it will be
counted as one memory group and automatically stored in the
memory .
j) Once the LAP memories are used up, the chronometer still work
but without LAP memory function.
k) At the bottom of the display a running icon shows the status.
l) The latest memory group will be named as “M 1”.
Set hour
Set minute
Set second
Countdown timer
Stopwatch
Fig.5b
SET
SET
SET
SET
SET
SET
+
-
ST/SP
ST/SP
+
-
+
-
Fig. 5b
