5
Preparation
1.
2.
3.
Caution
·
·
·
·
cover lid
DC jack
DC plug
USB plug
ultrasonic vibration
plate cover
How to use
Remove cover and lid When using in first time
Remove the buffer material between the cover
and body part.
Make sure ultrasonic vibration plate cover is
installed
※
Mist would not generate if the ultrasonic vibration plate cover
has not been installed.
※
Place the product on a stable surface
《
Using in USB port of computer
》
Insert the supplied USB cable to USB port of
computer or mobile battery and connect to DC
jack on a stable surface.
※
Mist may not generate normally or power may be off
depending on different computer.
Do not connect with USB hub
USB hub cannot ensure stable power supply, the
product may not operate normally.
Place the product on a stable surface which is
not near the connected computer.
Computer failure may be caused if it exposes to mist.
Connect USB cable before adding water.
Use USB port with 1.0A output.
