EN
5
• Position the sensor close to the main unit during cold
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
TIP
The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.
NOTE
Use alkaline batteries for longer usage and consumer
grade lithium batteries in temperatures below freezing.
TEMPERATURE AND HUMIDITy
To select temperature unit:
Slide °
C /
°
F
switch.
To toggle between each sensor’s readings:
Press
CHANNEL
repeatedly
OR
Press and hold
CHANNEL
for 2 seconds to initiate auto
toggle of channel readings.
To end, press
CHANNEL
.
To toggle between current, minimum and maximum
records for the past 24 hours:
Press
MIN. MAX.
repeatedly.
To clear the records:
Press and hold
MIN. MAX.
ICE WARNING
If temperature recorded falls between -2°C to 3°C (29°F to
37°F), LED indicator will flash and will stop flashing once the
temperature is out of this range.
PLACING OF UNIT
Mounting on metallic surface:
Place onto surface.
Mounting on wall:
Use wall mount hole.
Placing on a flat surface:
1. Remove battery compartment cover.
2. Remove pole from casing.
3. Replace battery compartment cover.
4. Insert pole through hole and place in desired position.
