8.
: monitor battery low
9.
: voice activation
10. Synchronizing status indicator light
11. Blood pressure classification bar
12. Heart rate counter
13.
: irregular heart beat detected
SETTING UP THE MONITOR
ASSEMBLE THE UNIT
1. Insert the small end of the air tube into the air
outlet on the monitor.
2. Snap cuff holder into place at the back of the
monitor.
3. Place cuff into holder.
INSTALLING AND REPLACING
THE BATTERIES
This monitor can work with a 6V adaptor which
has to be purchased separately.
1. Slide off the battery cover.
2. Install the batteries by matching the correct
polarities. Always use the correct battery
3. Align the cover flat against the battery
compartment, and then slide it upwards.
Above diagram displays:
1. Adaptor outlet
2. Battery compartment
Flashing indicates monitor batteries are
low.
Replace batteries promptly to ensure
accurate readings. Replace all the batteries at the
same time; it is dangerous to mix old and new
batteries.
Contact your local waste disposal
authority for instructions on how to dispose of
used batteries. Used batteries can be harmful to
the environment, and should not be thrown out
with household trash.
MONITOR SETTINGS
IMPORTANT
As blood pressure measurements
are recorded in the memory with date and time
stamp for easy analysis, set the monitor prior to
first use to ensure measurements are correctly
marked.
To set the monitor:
1. When monitor is off, press and hold
to
enter setting mode.
