3
EN
1
2
3
4
6
7
5
8
9
1.
LCD
Displays the current temperature monitored by the
remote unit
2.
LED Indicator
Flashes when the remote unit transmits a reading
3.
°
C /
°
F Slide Switch
Selects between Centigrade (
°
C) and Fahrenheit (
°
F)
4.
RESET Button
Returns all settings to default values
5.
Channel Selection Switch
Designates the remote unit Channel 1, 2, or 3
6.
Battery Compartment
Accommodates two AAA-size batteries
7.
Battery Door
8.
Wall-Mount
Used to attached the remote unit to a wall
9.
Removable Table Stand
For positioning the remote unit on a flat surface
MAIN FEATURES: REMOTE UNIT
BEFORE YOU BEGIN
Position the remote and main units within effective
transmission range which in usual circumstances, is
20 to 30 meters.
For best operation:
1.
Assign different channels to different remote units.
2.
Insert batteries for remote units before doing so
for the main unit.
3.
Place the main unit as close as possible to the
remote unit. Reset the main unit after installing
batteries to ensure easier synchronization
between the transmission and reception of
signals.
The effective range is affected by the building
materials and where the main and remote units are
positioned. Try various set-ups for best result.
Though the remote units are weather proof, they
should be placed away from direct sunlight, rain, or
snow.
REMOTE UNIT SETUP
For best results, use lithium ion batteries in the
remote sensing unit if the outdoor temperature falls
below -5
°
C (41
°
F), other battery types will not function
at such low temperatures.
If there is a clear plastic tab in the battery
compartment, please remove it before installing the
batteries.
To install the batteries and change the channel:
1.
Remove the screws on the battery compartment.
2.
Select the channel number on the
CHANNEL
slide switch.
3.
Select the temperature display unit on the
°
C/
°
F
slide switch.
NOTE
NOTE
4.
Insert the batteries strictly according to the
polarities shown.
5.
Replace the battery compartment door and secure
its screws.
6.
Using a blunt stylus such as a paper clip, press
RESET
.
BAR888 Eng New R0 OP
8/27/04, 6:39 PM
3
Black