EN
3
REMOTE SENSOR (RTHR328N) - FRONT VIEW
1
2
3
1. LCD display
2. LED status indicator
3. Ventilation duct
REMOTE SENSOR (RTHR328N) - BACK VIEW
1
2
3
4
5
6
7
8
1. Wall mount
2.
CHANNEL
switch (1-5)
3.
RESET
4.
°C / °F
5.
SEARCH
6.
EU / UK
radio signal format switch
7. Battery compartment
8. Fold-out stand
REMOTE SENSOR (RTHR328N) - LCD DISPLAY
1. Reception
2. Channel number (1-5)
3. Low battery indicator
4. Time
5. Temperature - °C or °F
6. Temperature reading
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
• Main unit
4 x UM-3 (AA) 1.5V
• Remote sensor
2 x UM-3 (AA) 1.5V
Insert batteries before first use, matching the polarity
as shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press
RESET
after each battery change.
To install the main unit batteries:
NOTE
Do not use rechargeable batteries.
shows when batteries are low.
UNIT
LOCATION
Main
Clock/Alarm/Calendar Area
Remote Sensor
Outdoor Temperature Area
NOTE
It is recommended that you use alkaline batteries
with this product for longer performance.
REMOTE SENSOR (RTHR328N)
This product is shipped with the RTHR328N Remote
Sensor. The main unit can collect data from up to 5
sensors.
The THGR328N and THR228N sensors are also
compatible with this weather station. (Additional sensors
are sold separately. Contact your local stockist for more
information.)
The RTHR328N sensor collects temperature readings
and signals from official time-keeping organizations for
the radio-controlled clock.
SENSOR SET UP
1. Open the battery compartment with a small Phillips
screwdriver and insert the batteries matching the
polarity (+ and -) as shown below.
BAR283_EN.indd 3
3/17/06 6:33:40 PM
P/N: 086L004374-016_EN REV1
4/10
