Oregon Scientific BAR200, Руководство пользователя

Страница: 5 / 60

E
N
4
ICON DESCRIPTION
Main unit is searching for sensor(s)
A channel has been found
Sensor 1 data received
and “ --.- “ The sensor cannot be found.
TIP The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
BAR200:
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
BAR200U:
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
BAR200A:
• WWVB-60 signal: within 3200km (2000 miles) of Fort
Collins Colorado. Manually set clock to select time zone
(Pacific, Mountain, Central or Eastern).
To enable / disable signal reception:
Press and hold enable or to disable signal reception.
NOTE Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG SIGNAL WEAK SIGNAL NO SIGNAL
MANUALLY SET CLOCK
1. Press and hold MODE .
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone offset, 12 / 24 hr format,
hour, minute, year, month, day and language.
BAR200 / BAR200U : Time zone offset sets the clock + / - 23
hours from the received clock signal time.
BAR200A : Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
NOTE The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with seconds and
clock with weekday.
P/N: 086L004956-010 REV1
5/60