4
GB
BATTERY INSTALLATION:
REMOTE UNIT
The remote unit uses two UM-4 or “AAA” size alkaline batteries.
Installation:
1. Remove the screws on the battery compartment.
2. Select the desired temperature scale by switching the °C/°F
switch located inside the battery compartment.
3. Select the channel number on the CHANNEL slide switch. Note
that once a channel is assigned to a remote unit, you can only
change it by removing the batteries or resetting the unit.
4. Insert the batteries strictly according to the polarities shown
inside the battery compartment.
5. Replace the battery compartment door and secure the screws.
Note: Disposed of improperly, batteries can be harmful.
Protect the environment by taking exhausted batteries to
authorized disposal stations.
BATTERY INSTALLATION: MAIN UNIT
1. Gently lift the tab on the battery compartment door.
2. Insert four UM-3 or “AA” size alkaline batteries.
3. Replace the battery compartment door.
Note: For both the remote sensor and the main unit, replace batteries when
they are low. The low battery indicator [
] in the indoor or / and outdoor
temperature window will be displayed when the batteries are low.
HOW TO READ THE KINETIC
WAVE DISPLAY
The kinetic wave display shows the signal receiving status of the
main unit. There are three possible forms:
The unit is in searching mode.
Channel registered in search mode.
No signal received in search mode.
