Oregon Scientific BAA623PH, Руководство пользователя, Страница: 11 / 54

10
EN
To force a manual search for clock signals, press and
hold for 2 seconds. If no signal is found, check the
batteries.
BAA623PH
Please follow the instructions for setting the clock and
calendar manually.
TURN CLOCK ON / OFF
Perform this step if you cannot receive clock signals.
Press and hold for 2 seconds. Then, manually set the
clock following the “Set Clock” instructions (below).
The signal icon indicates that the clock feature is
ON. No icon means that it is OFF.
Initial reception takes 2-10 minutes, and is initiated when
you first setup the unit, and whenever you press
RESET .
Once complete, the reception icon will stop blinking. The
icon is shown in the Clock Area.
STRONG SIGNAL WEAK SIGNAL NO SIGNAL
SEARCH FOR SENSOR
To search for the sensor, press and hold SEARCH for 2
seconds.
NOTE If the sensor is still not found, check the batteries,
obstructions, and remote unit location.
NOTE Signals from household devices such as
doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product performance.
The reception will resume once the interference ends.
CLOCK
BAR623P ONLY
The clock automatically synchronizes the current time
and date when it is brought within range of the radio
signal DCF77 generated from Frankfurt, Germany for
Central Europe.
NOTE The signals are collected by the main unit when
it is within 1500 km (932 miles) of a signal.
BAR623P_EN_V12.p65 2005.5.12, 14:05 10
P/N: 086-003909-019 REV1
11/54