9
Before You Begin Cleaning
1.
Unlock the clamp and slide
it up the tube assembly.
2.
Remove the water tank.
3.
Remove the cap on the
water tank.
4.
Fill the water tank 3/4 full. Do
not overfill the water tank.
WARNING!
!
Do not plug the steam cleaner into an electrical outlet
during assembly.
NOTICE
•
Always turn the steam switch knob to the closed position
before installing a filled water tank.
•
Do not leave the steam cleaner in one spot on any surface
for an extended period of time with a damp or wet cleaning
pad attached. This may damage the floor surface.
•
The steam cleaner should only be used on tiles, linoleum, or
sealed wood flooring. Do not use on laminate flooring*.
• Always use the cleaning pad when cleaning hard floors.
Ensure cleaning pad is in place and properly attached to the
floor head.
•
The force and heat of the steam may have an adverse effect
on some materials. Always test the steamer on a small
concealed area to determine if it is suitable for treatment.
9
Use
Steam Cleaning Hard Floors and Refreshing Carpets
To reduce the risk of personal injury, unplug cord
from electrical outlet and let the unit/accessories cool
down completely before handling.
fill line
*
Steam 50 is practical for any surface
with the
exception of those surfaces that are extremely
heat sensitive.
We recommend
NOT
using it on fine
silks, delicate materials such as velour, some very
thin plastics, unsealed hardwood, ceilings, drywall,
and exterior paint of automobiles, electronics or
items using electricty. If ever in doubt, test a small
area before beginning extensive cleaning.
