Orchid SoundWave 32, Руководство пользователя

Страница: 21 / 75

Section 1: Installing SoundWave 32
SoundWave 32 User's Manual 19
Be sure to
plug in all
cables
before
powering up
your PC.
8. Connect the DC power cable from the PC's power
supply to the DC power connector at the rear of
the CD-ROM drive. When all of these steps are
complete, your CD-ROM drive should be con-
nected to your PC’s power supply and to your
SoundWave 32.
9. At this point, carefully hold the SoundWave 32
by its top edges and lower it into its expansion
slot. Ensure that the SoundWave 32 seats firmly
into the slot, and that it aligns properly with the
computer's backplane. Be very careful that the
cables attached to the card do not get tangled or
pinched.
10. Secure the SoundWave 32 in place by fastening
its metal bracket to the computer backplane with
the screws that were removed.
11. If you are connecting a microphone and external
speakers to the SoundWave 32, see Figure 1.5 for
connection locations.
12. Reconnect previously removed cables and power
cords and replace the cover of the computer.
The Orchid CD-ROM drive and SoundWave 32 installa-
tions are complete.
Operating Your Orchid CD-ROM Drive
1. Press the eject button to open the CD tray (see
Figure 1.9).
2. Place the CD-ROM disc in the center of the tray.
3. Close the tray by either pressing the eject button
again, or gently pushing the tray in.
The drive should now be in its normal operating
position.