Orchid Righteous 3D II, Руководство пользователя

Страница: 10 / 40

Righteous 3D II User's Manual
8
Section 1: Hardware Installation
7. Connect your
monitor cable to
the top 15-pin
connector (blue)
on the Righteous
3D II.
8. Connect one end
of the VGA pass
through cable to
the bottom 15-pin
connector on the
Righteous 3D II.
9. Connect the other
end of the VGA
p a s s - t h r o u g h
cable to the 15-pin
connector on your
VGA graphics accelerator.
10. Replace the cover of the computer.
You are now ready to install the Righteous 3D II
software drivers. Refer to Section 2: Software Installa-
tion.
Figure 1.2: Righteous 3D II
Cable Connections