10
Press OFF key to exit
One Touch Memories (
M1,M2,M3
)
There are 3 memory keys, to program a number into any of them:
Press Store key
Enter the number you want to store
Press Store key again
Select M1(or M2 or M3) and press store again.
LCD will display the stored number
To dial a one touch memory (M1, M2 or M3)
Press M1(or M2or M3) LCD will display the stored number
Lift handset or press key to call the number
To end the call replace the handset or Press OFF key
Base station setting
Time and Date – You only need to do this once from one of the handsets.
NB:
If you have caller ID service enabled by your telecoms provider the time and date will be automatically
Updated when the phone rings.
Press OK key to enter the menu
Press up/down key to select ‘Base setting’
Press OK key to confirm
Press up/down key to select ‘set time’
Press OK key to confirm. The time and date are displayed such as “00-00-2000 12.00*AM
Enter the correct time in the following order: month, day, year, hour, minute, AM or PM, ( if invalid entry is
made you will hear a long beep) press * to switch between AM and PM
Press OK key to confirm
Press OFF key to exit
Restoring Base to factory default
Press OK key to enter the menu
Press up/down key to select ‘Base setting’
Press OK key to confirm
Press up/down key to select ‘Reset Base’
Press OK key to confirm
LCD will now display Confirm? 1: confirm 2: cancel
Press 1 or 2 then press OK key to confirm
Press OFF key to exit
Call waiting tone
When there is an incoming call from an external line during a call in progress, the base sends a series of
short beep to the handset in use. To turn the call waiting tone on or off follow these steps:
Press OK key to enter the menu
Press up/down key to select ‘base setting’
