24
Unable to transfer calls
You must use Recall or ‘R’ button when transferring calls – please ensure the Recall type is
set to TBR (Time Break Recall). A TBR
– ELR switch is normally located on the base of
the phone.
Unable t
o program the PBX
All
programming must be done from extension 201.
Make sure the phone being used to program is set to TONE not PULSE dialing mode.
Dial the password (
* * 01 1234 #
) before entering programming strings. You will hear a
confirmation message when the password or any programming sequence is entered
correctly.
Make a call out on a specific line
To access any line directly dial # followed by the line number
To Connect an Answer Machine, Fax Machine or PDQ machine
All such machines should be connected to an extension port
– do not connect on the line side.
When using such a machine we recommend connecting it to an unused extension number, or if all
are in use connect in parallel using a 2-way adaptor.
It is important that the PDQ machine is connected to one of the extension ports and not directly to
a phone line. Connecting to the phone line will cause false rings. When connecting to an
extension make sure the extension is programmed for direct mode (no need to dial 9 for a line)
see page 10
Contact Orchid for more assistance
You can email us at the following address with any further enquiries regarding the Orchid PBX
Range:
Technical specifications
Capacity
4 Lines and 16 Extensions
External sockets
Line and Extensions terminated on RJ11 sockets
External Music socket 3.5 mm Mono
Communication channels
7
Transmission loss
Extension to Extension < 1.5 dB
Extension to Exchange < 2 dB
Ringing Current
AC65V/50Hz
Balance about earth
300Hz...600Hz < 40dB
Содержание 416+
Страница 1: ...1 Model PBX 416 Programming User Guide...
