Orcam ORCAM READ, Руководство пользователя, Страница: 5 / 26

6. Charging outlet (Type C)
7. Eyelet loop
8. Audio outlet (AUX)
Charging OrCam Read.
Before turning on the device for the first time, OrCam recommends charging the device for at
least three hours. For all subsequent charges, OrCam Read fully charges in 90-120 minutes.
OrCam recommends using only the original OrCam charger provided.
To charge OrCam Read:
1. Insert the ​ charging ​ cable into the type C inlet of OrCam Read.
2. Plug the USB end ​ of the charging cable ​ into the charger ​ box ​ and then into an electrical
socket.
Notes.
● To check the battery status, rapidly press the trigger button twice and say after the long
beep, “Check the battery status”.
● OrCam recommends using only the original OrCam charger provided.
● The device can charge when powered off, awake, and in Suspend mode. The device will
wake up when charging in Suspend mode or powered off. When awake or in Suspend
mode, the device will chime and announce it is charging. When powered off, the device
will beep, and an orange light opposite the power button will light up for a few seconds,
turning blue upon fully awakening.
● The ​ OrCam Read charger supports 100-240 V, 50/60 Hz.
● OrCam recommends charging your device at least once a month if you do not use your
device frequently.
Get Familiar with OrCam Read.
Power Button.
The power button is an embossed, thin, oval-shaped button on the thin, long side of the device
located near the charging inlet. The power button enables you to do the following:
Turn on
​
Your
​
OrCam Read.
1. Press the power button for about 2 seconds. Once you hear a beep sound you may let
go of the power button.
2. The LED indicator on the thin side opposite the power button will turn orange as the
device wakes up, and will turn blue upon fully awakening.
3. After about one minute you will hear a chime and then, “OrCam Read Version [xx] is
ready. Battery is [xx] percent charged”.