Orcam ORCAM READ, Руководство пользователя, Страница: 25 / 26

The Squaire 12, Am Flughafen,
60549 Frankfurt am Main, Germany
Telephone Number: +49 69 95932-5090
Safety and Warnings.
Before using the OrCam device, read these precautions carefully to avoid dangerous situations
and to ensure ideal performance of your device.
Handle your OrCam device with care. It can be damaged if dropped, burned, punctured, or
crushed. Do not open the outer casing of the device.
The OrCam device is designed to work in ambient temperatures between 32
⁰
F and 104
⁰
F (0
⁰
C
and 40 ⁰ C) and in normal conditions (Relative Humidity of 10% to 90% RH and Atmospheric
Pressure of up to 2000m above sea level (700hPa)). The device can be damaged if used
outside of this range. Store and transport in a cool, dry place (32
⁰ F to 104 ⁰ F (0 ⁰ C to 40 ⁰ C) and
Relative Humidity of 5% to 90% and atmospheric pressure of 700hPa to 1060hPa)). The OrCam
device is
​
water-resistant
​
but not waterproof. This means the device can withstand light rain or
drizzle for short periods of time, although it is not recommended. Do not use the OrCam device
in heavy rain, at the beach or swimming pool, or in or near a bathtub or shower. Do not
submerge the OrCam device in any liquid. The OrCam device meets the standards of IP Code:
IP22.
Should you have a problem operating the OrCam device, if the case or lens is cracked, or if you
believe there is something wrong with the device, please contact support and do not attempt to
repair it by yourself. Only qualified OrCam personnel may repair or service your device.
Unauthorized repairs may void your warranty.
Do not attempt to replace the battery; you may damage it, which could cause overheating and
even injury. The battery is designed to last for two years of average use (one charging cycle per
day on average) after which it may need to be replaced. Use only the charger supplied with your
OrCam device. Using another charger may void your warranty and could cause severe injury.
Do not force a connector into a port or apply excessive pressure to a button. This may cause
damage that is not covered under the warranty. If a connector does not insert easily, check for
obstructions in the port and verify that you have the correct connector for that port. Do not
combine with software, hardware, or other equipment not supplied by OrCam. Exposing the
device to magnetic fields may damage the unit or erase your data.
When using the OrCam device or charging the battery, it is normal for the device to get warm. If
the unit becomes excessively hot, leaks, or gives off a burning smell, turn the device off
immediately and contact OrCam Support. If you have specific questions about use alongside an