Orca UVpro V-LAB, Руководство по эксплуатации, Страница: 12 / 30

Recirculating Air Disinfection System V-lab
orca GmbH www. uvpro .de Seite 10 von 28
3. ELECTRONIC COMPONENTS
Electronic components
The UV pro V-LAB Recirculating Air Disinfection System has a high-quality ballast (10) for optimum
operation of the UV pro tube. In this way maximum power, high frequent ignition and high durability
can be guaranteed. The high-frequency technology ensures a very high efficiency and low power
consumption. Of course, all components are in conformity with the “Low Voltage Directive” and “EMC
directive”.
If a tube has a malfunction or in case of a defect in the wiring to or in the tube socket the ballast
automatically switches the connected tube off. Thus, the circuit board will be protected and a
malfunction can be detected by our monitoring units. The temperature of the square tube with the
fully encapsulated ballast is a maximum of 35 °C (at room temperature). The optimum temperature is
between 0 °C and +40 °C. Heating to 70 °C in a short term is possible but leads to a momentary power
loss and permanently accelerates the aging of the system.
Connection directly or with UV pro monitoring unit
- Connection with the grid 230 V
AC
±10 % . The protection of the connection via a residual current
circuit breaker (30 mA) is mandatory.
- UV pro CU1
The optional monitoring unit
CU1
can be used for one
UV pro
device. You
will find further information in the documentations of this monitoring
unit.
- UV pro UVC-Line 8/16/24 The optional monitoring unit UVC-Line 8/16/24 can be used for several
UV pro devices. Further information can be found in the documentations
of this monitoring unit.