17
d.
Rinse and clean the filter (4-5).
Put the filter under water until the water is clean.
e.
Reinstall the filters.
Pay attention to the good position and close the covers by pressing the buttons.
3.2 Foam Installation
Attention: If your cleaner is in good performance, please ignore this instruction.
The below instruction is only used for special situation where the cleaner has difficulties to
climb the pool walls.
Stick two foams on the reverse surface of top cover (see below picture), make sure the
two foams are in the middle part of top cover.
4-5
Large face in the middle
Appuyer
4-7
4-6