Orbitalum PS 4.5 Скачать руководство пользователя страница 33

Страница: 33 / 36

Operating instructions PS 4.5, PS 6.6

8 Maintenance

orbitalum tools

gmbh

(12.06)

MT_PS 4.5, PS 6.6_BA_04_790048762_03.doc

8 Maintenance

The Portable Tube Saw PS is designed for a long service life and low
maintenance.

Please follow the maintenance instructions below.

Danger of death by electric shock

Pull the mains plug before carrying out any maintenance work and allow

the machine to come to a stop.

Time / Interval

Activity

Before starting work

Remove any chips and dirt from the saw blades.

Remove any chips and dirt from the guiding blade and the threaded

spindle of the vice.

Before starting work

Remove the saw blade and use the brush to brush off any chips.

Every time the cutter is
cleaned.

Clean the shafts using a cloth or brush.

Use a brush to remove any chips from between the slide and the slide
housing. To do so, move the slide to the upper and lower position.

DANGER

Содержание PS 4.5





































Результаты поиска

Содержание PS 4.5

Отзывы:

Бренды по названию

Популярные бренды

Orbitalum PS 4.5, Руководство по эксплуатации

Результаты поиска

Содержание PS 4.5

Отзывы:

Бренды по названию

Популярные бренды