2-IN-1 Drip Filter/
Pressure Regulator with
1/2" Drip-Lock
®
Adapter
Instructions
Important Guidelines
Installation Instructions
Congratulations on your purchase of the Orbit
®
2-in-1
Filter Pressure Regulator. This revolutionary product
allows you to convert your 1" FPT irrigation valve into
a low pressure drip valve.
200 Mesh (removable) filter
30 Psi pressure regulator
I" MPT Inlet/outlet
Included 1"x1/2" FPT Drip-Lock
®
Adapter
For outdoor use with cold water only.
Check local codes for installation requirements
If static water pressure exceeds 80 PSI, a pressure regulator should be
installed on the main sprinkler line.
Pressure test all water lines before covering pipe and timer control wire.
Warning: DO NOT use pipe dope on threads, use thread seal tape.
Step 1: Put 5 complete turns of tape
around the threads of each end of the
Filter Pressure Regulator
Step 2: Thread the Filter Pressure Regulator into
the valve until snug. Important: ensure that the
water flow arrow and pressure regulator point
away from the valve and towards the sprinkler pipe.
If desired, thread the adapter onto the pressure
regulated side of the 2-in-1 filter.
pressure
regulator
Features:
