Parts Listing
Flush Cap
Filter Housing
Filter Housing O-Ring
Filter Body
Filter O-Rings
Filter Receiver
Pressure Regulator Assembly
1" FPT 1/2" Drip-Lock
®
Adapter
Maintenance
Monthly
Use the flush port to clean large debris from the filter (adjust frequency based on water
conditions). Before flushing ensure that the timer is in the OFF position. Next, remove the flush
cap and attach a garden hose to the filter housing. Rotate the bleed screw counter-clockwise to
manually open the valve and let the water run for 30 seconds. Turn the bleed screw clockwise to
close the valve and replace the flush cap.
Annually
Removing fine debris from the filter. With your timer in the OFF position, remove the filter
housing by unscrewing the housing ring. Gently remove the filter and flush with clean water.
Ensuring that all four o-rings are in place. Replace housing and hand tighten the housing ring.
A
A
B
B
C
C
D
D
E
E
F
F
G
H
G
H
Orbit
®
Irrigation Products, Inc.
North Salt Lake, UT 84054
1-800-488-6156
www.orbitonline.com
