Orbit baby Double Stroller Kit, Руководство пользователя

Страница: 17 / 32

Manual Text Booklet – Orbit Baby Double Stroller Kit –
ENGLISH – 9
Attaching the stroller frame leg connectors
⚠
WARNING
⚠
◦
Proper assembly is required. Check that leg connectors are properly installed and fasteners
are tight. Pull on leg connectors to confirm they are secure.
⃞
Open one of the stroller frame leg connector
Ⓠ
assemblies by removing the two Phillips screws
that are loosely threaded into the connector using a Phillips screwdriver tool. Position each leg
connector against its corresponding rear stroller frame leg, so that the triangular Double Stroller Kit
SmartHub Attachment openings are on the inside of the rear leg
Ⓟ
. Slide the open leg connector
over the rear leg and around the tie rod bolt
Ⓡ
.
⃞
Close the leg connector over the rear stroller frame leg. Using a Phillips screwdriver tool, fully
tighten the two mounting bolts to secure the connector in place. Check your installation by twisting
on the connector to ensure it does not move. Repeat with the other connector.
Assembling and attaching the Double Stroller Kit SmartHub Attachment
⚠
WARNING
⚠
FALL HAZARD:
◦
Always check that the Double Stroller Kit SmartHub Attachment is securely locked into
the stroller frame leg connectors before placing your child into stroller or starting to stroll.
Pull backwards on the Double Stroller Kit SmartHub Attachment and check that the red
warning triangles on both sides are NOT visible.
⃞
Insert the two Double Stroller Kit SmartHub Attachment wheels
Ⓞ
. You will hear a CLICK when
they are locked in place.
⃞
Grasp the Double Stroller Kit SmartHub Attachment with one hand while holding the stroller frame
with your other hand. Pull on the release lever
Ⓚ
and guide both tube ends into the stroller frame
leg connectors
Ⓠ
until they are fully inserted and the red warning triangles have been fully covered
by the stroller frame leg connectors. You will hear a CLICK when the Double Stroller Kit SmartHub
Attachment is locked in place.