EN
Assembly:
Remove all of the pieces from the box and lay them out so you can clearly
see them. Check that you have all the parts. Keep the box for storage, or if
you ever need to return the telescope for service.
Gently pull the aluminium tripod legs apart as far as they will go until the
center leg braces sit flat, in a horizontal position.
The telescope tube has a mounting tab on its underside. Place this tab into
the slot on top of the tripod. Tighten the knurled knob on the tripod head to
hold the tube tightly to the tripod.
Screw the aiming control arm into the threaded socket at the rear of the
mount.
Insert the diagonal prism into the end of the telescope tube.
Insert one eyepiece into the diagonal prism.
Remove the dust cap from the large end of the telescope.
Your telescope is now ready for use.
IMPORTANT:
Observation is only possible with the diagonal prism you first insert!
