SF 0247
11
•
DO NOT USE fan in window. Rain may create an
electrical hazard. Do not leave the fan operating
adjacent to an area where water has been collected to
avoid the potential of electrical hazard.
ASSEMBLY & OPERATION
Stand pipe & Base Assembly
1.
Assemble the round base first of all, and be sure to align the four holes on the round base. Tighten
the four screws and insert the base ring down over the round base. (As fig.1 shown)
1
Placa central logo
2
Logo plate
3
Front grill
4
Grill ring
5
Blade cap
6
Fan blade
7
Rear grill mounting nut
8
Motor housing
9
Tilt adjustement knob
10
Control panel
11
Extension pole
12
Base
13
Remote control
