LI 6000
9
POSITIONING THE APPLIANCE
•
Always place the appliance at the back of the kitchen counter.
•
Do not place next to hot areas, for example gas rings and electric hotplates.
CORD, PLUG AND MAINS SOCKET
•
Ensure that the cord is fully extended.
•
Do not allow the cord to hang over the edge of a table/counter, and keep it away from hot objects and
naked flames.
•
Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has
been dropped or damaged in any other way.
•
If the apparatus or plug is damaged, it must be inspected and if necessary, repaired by an authorized repair
engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself.
•
Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
•
Check that it is not possible to pull or trip over the cord or any extension cord.
KEY TO MAIN COMPONENTS OF THE APPLIANCE
1. Pusher and tube for fruits/vegetables.
2. Lid.
3. Blade support and juice outlet.
4. Juice Jar (1L).
5. Base-motor with stainless steel housing.
6. Security lock clamp.
7. Deposit for pulp (1.8L).
8. On/off knob (2 speeds)
PRIOR TO FIRST USE
Before using for the first time, or after prolonged storage without use, wash any parts that will come into
contact with food.
USING THE APPLIANCE
ASSEMBLY BEFORE USE:
•
Place the base-motor (5) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the
four suction cups underneath.
•
Place de deposit for pulp (7) on its support (on side of base). Place the blade support (3) on upper part of
base, facing the juice outlet with slip of base and on deposit for pulp, so it will be set.
•
Place the blade-filter on the motor shaft and press it for well placing. Make sure that the blade-filter
doesn't sit too loosely on the base and that it rotates evenly.
•
Be careful not to touch the sharp parts of the blade-filter.
•
Place the lid (2) with the pusher (1) on blade support and fit it with 2 security lock clamps (6). The appliance
has a security system, if it is not well assembled, it won’t work.
•
Place juice jar (4) or other recipient under the juice outlet (3).
•
The appliance is ready for use now.
PREPARING FRUITS AND VEGETABLES FOR JUICING
•
Always wash fruits and vegetables thoroughly before juicing.
•
It is not necessary to remove seeds, pits or thin peels before using the appliance.
•
Fruits with thick peels such as oranges and lemons must be peeled before juicing. It is particularly important
to remove all the peel (including the pith), as even small amounts of peel can impart an unpleasant taste to
the juice.
•
It is also necessary to remove large pits (such as plum and apricot pits) to avoid damaging the appliance.
•
Large fruits and vegetables should be cut into pieces that can fit into the funnel (9).