EN 4500
8
19. In case that you need a copy of the
instruction manual, you can ask find it in our
website: www.orbegozo.com
20. WARNING: In case of misuse, there is a risk
of possible injury.
Network supply
1.
3 230V AC sockets, current load and total power consumption max. 16A / max.
3680W.
2.
The backlit switch controls the power to all the outputs at the same time, turns off the
230V and the USB sockets.
USB charging outputs
A. 2x Type A: 2.4 A / 5.0 VDC maximum load current, max. 12.0W.
B. 2x Type-C: Maximum charging current 2.4A / 5.0V DC, max. 12.0W.
C. Type A + C: Combined use. Maximum charge current 3.4A / 5.0V DC, max. 17.0W.
D. When two devices are connected to the same type of USB ports (Type-A or Type-C) at
the same time, the smart circuit detects their batteries, adjusts the charging current and
changes the charging speed depending on their capacity and status. loading. The
maximum charge current is determined by the type of USB port, see the specifications
above.
E. When two or more devices are connected to different types of USB ports at the same
time, the charging system works similarly. The maximum charging current of 3.4 A is
divided between up to 4 active USB ports.
F. The charging time will depend on the number of connected devices, the capacity and
the state of charge of their batteries.
Wireless charging dock
1.
The wireless device is the induction charger based on the Qi standard. Make sure the
device you want to charge supports this standard. It will not work with another
wireless charging standard. Some protective covers prevent wireless charging, so
remove the cover if charging doesn't work.
2.
The wireless charging pad must be horizontal so that the phone does not slip on its
surface. Put it on the charging pad marked with the Qi logo, turn on the power switch.
Please note the correct position according to the following picture.
