DS 74160.70 BL/N
15
6.
Place the inner chimney inside the outer chimney. Screw the outer chimney bracket to the chimney. Drill
two holes on the wall to place outer chimney bracket.
7.
Place the assembled chimney on the hood. Fix outer chimney bracket to the wall with screws. Conect the
exhaust pipe to the exhausting hole. Move up the inner chimney to inner chimney bracket nad screw
them.
Vent inside
If you do not have an outlet to the outside, the exhaust pipe is not required and the installation is similar to
the one shown in the “INSTALLATION (VENT OUTSIDE)” section but you have to install carbon filter (not
included) in the motor.
To put the carbon filter, place on the side of motor and turn until fit it. In order to install the activated
carbon filter, the filter should be detached first. When activated carbon filters are attached, the suction
power will be lowered.
