BV 5035 / BV 5040
14
Do not place large pieces of solid of frozen foods into the blender jug. Always break pieces before
blending.
Do not process boiling liquids or hot ingredients. Allow hot ingredients to cool before placing them
into the blender jug.
HOW TO CLEAN THE BLENDER
1.
Unplug the blender from electrical outlet.
2.
Remove the jar from the blender base. Remove the lid, add a cup of cleaning solution made by
adding a few drops of dishwashing detergent to 1 cup of cool water to the jar. Scrub and flush out
the interior of jar and the lid to dislodge and remove as much residue as possible. Empty the jar.
3.
Add more cleaning solution, put lid on jar, place in on motor base, and run on high speed for two
minutes.
4.
Empty the jar and repeat as above using clean rinse water in place of cleaning solution. Empty, rinse
and dry prior to storing unit.
5.
Wipe blender base, control panel and cord with a damp cloth or sponge. To remove stubborn spots,
use a mild, non-abrasive cleaner.
6.
Carefully wash the gasket, jar and cover in hot soapy water.
7.
In order to clean the blades, turn clockwise the device placed at the bottom of the jar in order to
disassemble them. Rinse and dry thoroughly. Do not wash blades, gasket, plastic jar or cover in
dishwasher.
Note:
Do not immerse the motor base, power cord or power plug in water or any other liquid.
Disposal of old electrical appliances.
The European directive 2012/19/UE on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should
contact their local authority or retailer for information concerning the correct disposal of their old
appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the
requirements of the EMC directive 2014/30/EU.
