BV 5035 / BV 5040
12
KNOW YOUR BLENDER
1. Measuring cup
2. Jar cover
3. Jug (BV 5035 plastic / BV 5040 glass)
4. Handle
5. Motor unit
6. Cable
7. Feet
8. Base
9. Knob
HOW TO USE BLENDER
After unpacking the blender, wash everything except the blender base in hot, soapy water. Try thoroughly.
Do not place in dishwasher. Wipe the blender base with a damp cloth or sponge. Do not immerse the base
in water. Care should be taken when handing the blades, as they are very sharp.
How to assemble and use
Important:
Your blender jar and cutting blades are subject to wear during normal use. Always inspect
cutting blades for broken, cracked or loose blades. If jar-cutting blades are damaged, do not use.
1.
Make sure blender is unplugged. Place blender base on clean, dry
surface.
2.
Place the jar on the motor unit. To do this, fit the jug with the
body leaving the handle to the right and turning it until it gets
locked.
This blender is fitted with a safety device that stops
the motor from starting if the jar is not positioned correctly
.
The blade assembly must be screwed into the jar firmly. If not, it
may loosen when the motor is turned on.
3.
Peeled or cored the fruit or vegetables and then cut it into small
dices, put the food piece into the jar. Usually certain amount of
purified water has to be add to facilitate the smooth running of
appliance. The amount of mixture should not exceed the max
level as indicated on the jar. Process food or beverages. Place hand on lid when blending liquids.
Note
: never use boiling liquid or run the appliance empty.
4.
Replace the jar cover on the jar.
5.
You may add ingredient into the jar through the center opening of jar cover during operation, then
close the measuring cup if necessary.
Note
: the measuring cup can only be opened by pressing the
end with the mark of push, but never remove out.
6.
Connect the plug to wall outlet and set speed control to your desired setting. You can turn the
speed control to the P position if want to accelerate the process of blending. The detailed
