BP 0303 A
14
These instructions for use belong to the appliance and
must be kept in a safe place. When changing owners,
these instructions must be surrendered to the new
owner!
SAFE POSITIONING
1. The heater must not be located immediately below a socket outlet
2. For your own safety and that of others: water and electricity are a dangerous combination!
Do
not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. Ensure
that the appliance cannot fall into water (bath wash basin, shower cubicle, etc.)
3. Please read also the safety information’s before using.
4. Do not use the heater on extremely deep-pile carpets!
5. Do not use the heater in an upright position.
FEATURES
230 V ~ 50 Hz, 1200W
The facility of 400/800/1200W three heater adjustments is for your convenience.
There is tipover switch on the base. When the heater tips over, the electricity will be turned off
automatically.
Overheating protection. It disconnects the appliance in case of overheating by menas of a
thermofuse.
OPERATION
1.
Insert the plug into the suitable sockets.
2.
Set the power supply switch on the “I” position and the middle tube will be in use. The
other 2 heating tubes can be controlled by their correspondent switches.
3.
Press the oscillation switch if you want to swing the units.
4.
If you want to change the direction of body frame, please hold the handle and turn
around the body frame slightly.
5.
After use, turn off all switches and pull out power supply plugs.
