OPTICODEC-PC
INSTALLATION — STREAMING ENCODER
2-3
c)
Click “OK.”
This will install the Opticodec-PC Encoder application on your computer.
C)
Answer the questions when prompted by the Orban installer.
The installer will allow you to create a desktop icon pointing to the Opti-
codec-PC Encoder application.
Installation on any drive is possible. We recommend installing to the de-
fault directory structure to maintain the proper directory hierarchy, espe-
cially for multiple encoder installation. Failure to follow this recommen-
dation may produce unpredictable behavior.
D)
After installation has completed, Opticodec-PC is ready for configuration and
connection.
Software Authentication
•
Opticodec-PC PE does not require software authentication. Opticodec-PC is
tied to an associated Optimod-PC by serial number and can be used in or
moved to any computer containing its associated Optimod-PC card.
•
Opticodec-PC LE requires software authentication to activate it and to bind it
to the computer hardware in which it is installed. Once the software is prop-
erly installed and runs the first time, it will guide you through the details of
authentication.
To summarize the authentication procedure:
a)
Copy the Opticodec-PC hardware ID number presented to you by the
software.
b)
Submit this number by email to Orban for authentication.
c)
Orban will supply you a hardware validation number that you will enter
into Opticodec-LE to complete the authentication. Once authenticated,
Opticodec-PC LE will only run on the computer system to which it has been
authenticated.
Configuring Opticodec-PC
This section provides the necessary information to configure , and connect the Opti-
codec-PC Encoder as quickly as possible. It assumes that:
•
The software will be used with a TCP/IP network.
•
One or more of the supported Streaming Servers, if used, are available and
configured for connection from Opticodec-PC.
•
Unicast or multicast operation has been decided and understood,
•
Firewalls, if any, are properly configured.
For details on various streaming encoder configurations, see Section 3: Configura-
tion — Streaming Encoder starting on page 3-1. For details on how to setup TCP/IP