13
EN
Switching off
To switch off the kettle before boiling, switch the switch
(6)
to 0 (Off).
Disconnect the appliance from the power supply when it is finished. Do not
open the cover when splashing.
PROTECTION FROM HEATING WITHOUT WATER
If you accidentally turn on the kettle when it is empty, the power-on protection
without water turns it off automatically.
Allow the kettle to cool down for a short time.
After a short break, you can use the kettle in the normal way.
NOTIFICATIONS!
• Never use the appliance empty. If this happened accidentally, the thermal
fuse switches the device off automatically. Disconnect the appliance from
the mains and allow it to cool completely.
• Do not touch the metal bottom during operation. There may be burns.
Care, maintenance and cleaning
1
Before cleaning, disconnect the appliance from the mains and allow it to
cool down completely.
2
Do not immerse the mains cord, kettle or base into water.
3
Do not use solvents or harsh detergents to make the surface smooth and
glossy. They could damage the glazed surface of the kettle.
The outer surface of the kettle can be wiped with a damp cloth, then
polished with a soft and dry cloth.
WARNING!
THE KETTLE, THE POWER SUPPLY, THE NETWORK CABLE OR ITS
PENDANT DO NOT IMMERSE IN THE WATER!
4
Regular cleaning is required from the deposition of the stones. The interval
of such cleaning depends on the water hardness in your area and on the
frequency of use of the kettle
5
For easier storage, the power cord can be clamped around the base.
Before storing the kettle, ensure it is turned off, clean and dry. Ensure that
the lid is securely seated in the closed position. Wipe the network cord
around the bracket at the bottom of the stand. Place the kettle vertically on
the base.
Do not remove any objects on the lid.
6
Do not disassemble! Repair your authorized service.
