9
EN
Unpacking / Packaging
• Unpack and remove all parts of packaging waste and labels
before putting the device into operation. Keep all packaging
materials in a safe place or keep them out of the reach of children
and inappropriate persons.
There is a risk of serious injury! There is a risk of choking!
Check / Startup
• The appliance is designed for food preparation. Therefore,
clean all parts before putting it into operation according to the
instructions in section „Putting into operation“, respectively.
„Cleaning and maintenance“.
Warning!
• Never immerse the kettle, the base (power stand), the power cord
or its plug into water or other liquids.
• Never clean the device (kettle with base) and the power cord
with the plug in a way that could cause the liquid to flow into the
device. Clean these parts with a slightly moistened cloth and
wipe dry or let it dry. Clean the device only when switched off is
disconnected from mains power and sufficiently cooled.
• We recommend performing both initial and subsequent regular
machine inspections. It is very important that the lid is well closed
and not damaged. No curtains may be damaged. Do not attempt
to interfere with the construction or adjustment of the component
parts in any way.
• Never use the appliance if it is incomplete, damaged, or any part
of it has been damaged during use. If the device is damaged,
have it repaired by a specialist service.
• Do not use the non-original and incomplete parts of the appliance
- the kettle and the appropriate base (power stand) with the
power cord and the plug.
There is a risk of electric shock!
There is a risk of serious injury or life threatening! There is a risk
of damage to equipment or other property damage!
Location / Installation
• Use the device only in places where it is not overturned.
• Only place the appliance on straight, firm and stable pads -
kitchen work desks and furniture parts, suitable for the location of
kitchen utensils.
• Always make sure that the place you want to place the device
has enough space, stability, mechanical strength and adequate
lighting.
