Orava RCD-811 Скачать руководство пользователя страница 5

5

EN

2. Special Safety Instructions. 

Read carefully!

 

Electrical equipment is designed and manufactured in such a way as to allow for safe 

operation and use by persons without a professional qualification. Despite all the me-

asures taken by the manufacturer to ensure safe use, handling and use, it carries with 

it certain residual risks and associated potential hazards. To warn of possible hazards, 

the following symbols and their meanings have been used on the device and in the 

accompanying documentation:

 

This symbol alerts users that the device is operating a dangerous

electrical voltage. Do not remove protective covers on the device.

Failure to observe the safety instructions during use and operation of

the device may result in:

Danger of electric shock!

Danger of serious injury or life threatening!

This symbol alerts users to the following:  Risk of serious injury or

life threatening when not following the safety instructions when using

and operating the unit!

Danger of damage to equipment or other damage to property!

This symbol means that the product is made with a double insulation be-

tween hazardous live parts (parts with dangerous voltage from the mains) 

and parts that are accessible in normal use.

 

Transportation

•  Only use a trolley or mobile table designed or recommended by the manufacturer to 

transport the appliance. Use caution when using a transport carriage to avoid overtur-

ning the device.

•  Always transfer the device after disconnecting all cable connections.

•  Grab the device by gripping the side covers.

 

There is a risk of serious injury or life threatening! 

 

There is a risk of damage to the device!

Unpacking/Packaging

•  Unpack the equipment and accessories before putting it into operation and dispose of 

all parts of packaging material, labels and labels and place them in a safe place or keep 

them out of the reach of children and inappropriate persons.

•  Clean the machine before commissioning as described in the „Commissioning“ or. “Cle-

aning“ section.

•  Never clean the appliance, remote control, and power cord with a plug in a way that the 

cleaning liquid could get into the device.

•  Clean these parts with a slightly moistened cloth and wipe dry or let it dry.

•  Only clean the appliance when the appliance is switched off and disconnected from the 

mains.

 

There is a risk of electric shock! 

 

There is a risk of electrical short circuit!

!

Содержание RCD-811























Отзывы: