14
EN
Radio control
Basic operations
1
Switch the audio source with the FUNC switch. on the radio.
Expand the TELESCOPIC ANTENNA to its maximum length and adjust its angle and
direction so that the reception is as high as possible.
2
Automatic tuning
In radio mode, press
u
. The automatic tuning and storage of all available FM stations
will start automatically.
3
After tuning in and storing the stations, select PRE-UP and PRE-DN.
4 Manual Tuning
In radio mode, press
>
or
.
to start tuning the FM stations up or down. Monitor the
display
Tuning stops when you tune in to the next station in that direction.
5 Storing stations
In the radio mode, press
>
or
.
tune in the desired station. Press the PROG button
once.
The preset number indicator will flash on the display.
Use PRE-UP and PRE-DN to select the desired preset number to save the tuned
station.
Press the PROG button again. The tune station is stored under the preset number you
have selected. Follow the steps below to tune other stations.
The new station will overwrite a previously stored station on the preset.
6
Press the volume up / down button to adjust the volume. The volume is displayed on the
display.
Listening to the radio
Expand the TELESCOPIC ANTENNA to its maximum length and adjust its angle and
direction so that the reception is as high as possible.
Improving income
Adjust the position and direction of the telescopic FM antenna.
Note
After the device is turned off and on again, the last listened station will be played back in
the radio mode.