20
EN
2. Cleaning the device‘s outer covers
- When cleaning the outside covers of the appliance, make sure that cleaning
agents or water do not enter the ventilation openings.
• Otherwise, do not use the appliance and have it checked by an authorized
service center for its safety and proper operation.
- Use only a soft sponge or cloth to clean the outside covers of the appliance
and liquid detergents designed for cleaning and washing the dishwasher.
• Do not use abrasive (scrubbing) steel wires, cleaning powders, and the like.
Do not use any scrapers and sharp tools.
- Apply a small amount of liquid detergent concentrate to the sponge or cloth.
Clean dirty surfaces with adequate pressure, but thoroughly wipe them and
dispose of all food and grease residues.
- Then clean the cleaned surfaces with a soft cloth and warm water.
• Repeat this procedure as necessary to remove any detergent residue.
- Always dry thoroughly with a soft cloth or paper towel, or allow it to dry.
3. Cleaning the rotary plate and the supporting swivel ring
- Perform routine cleaning of the rotary table and the supporting swing ring
regularly and in connection with the intensity of the appliance usage and
possible contamination.
• The guiding wheels of the swivel ring (and the area on which the wheels
move) must be kept clean and dry to prevent them from slipping or to
prevent their free movement. A dirty swivel ring may cause excessive
rotating drum noise during the operation of the device.
- Cleaning the rotary plate and the rotary ring can be done in a way that
these parts are completely immersed in warm water with a small amount of
detergent.
- Clean parts with clean, warm water.
- Always apply the cleaned and washed parts dry by using a cloth or paper
towel or leave to dry.
- Be careful when cleaning the turntable. The plate is glass and it can be
slipped, dropped and damaged when handled by wet hands.