19
EN
Cleaning and maintenance of the device
Instructions for cleaning the door seals, the enclosed interior (hollow)
spaces and adjacent parts of the device
• It is important to ensure that the equipment is maintained in proper purity
to ensure safe operation and to achieve the optimal service life of the
equipment.
• When the appliance is used, it is always necessary to clean all parts of
food, grease and burns.
• Failure to carry out regular and proper maintenance of the appliance results
in a decrease in its safety and its practical life.
Warning!
• Never spill water or other fluids into the appliance and its surfaces.
• Observe the following procedures and instructions when cleaning the
machine:
1. Cleaning of doors, door seals and internal (hollow) spaces and adjacent
parts.
Caution!
• It is very important that the door is well closed and that the door and door
seal are not dirty and in any way damaged.
• Doors and locks and sealing surfaces of the doors and adjacent parts must
not be damaged or dirty.
• It is specifically forbidden to change, adjust or repair a door, control panel,
locks or other parts of the device. If they are damaged, they must be
repaired only by a qualified service technician.
• When cleaning the interior, be careful not to damage or remove, for
example, (if the cover is part of the device).
Do not remove the waveguide cover.
- Use only a soft sponge or cloth and liquid detergents for cleaning and
washing the dishwasher to clean the doors, door seals and adjacent parts
as well as the inside of the appliance.
• Do not use abrasive (scrubbing) steel wires, cleaning powders, and the like.
Do not use any scrapers and sharp tools.
• Do not use steam and / or high pressure cleaners as they may damage the
safety parts of the appliance.
- Apply a small amount of liquid detergent concentrate to the sponge or cloth.
Clean the parts with adequate pressure but thoroughly wipe them and
remove all food and grease residues.
- Apply (wash) the cleaned surfaces of the doors, door seals and interior
spaces and parts with a soft cloth and warm water.
• Repeat this procedure 2-3 times to remove any detergent residue.
- Clean and wash thoroughly cleaned and washed surfaces of doors, door
seals and interior spaces with a soft cloth or paper towel.