8
EN
Preparation
Power supply
The device works on three 1.5 V AAA batteries.
Before using the device, you must insert the
batteries into the device. Open the battery cover
and insert three 1.5 V batteries.
Observe the correct po and -.
Close the battery cover.
Weighing
Location
Place the device on a fl at, fi rm and hard surface.
Do not place it, for example on the carpet.
1
Switch on the balance by pressing your
feet on the lower right edge of the glass
and wait a while until the display shows
„
0.00
“ or stand directly on the scale.
If the display shows „
Err
“ error message,
instead „
0.00
“, repeat step
1
.
2
Carefully stand on the scales. Stand in the
middle of it as shown and distribute the
weight evenly on both legs. Stand upright
and stationary during weighing. Wait until
your weight appears on the display (eg
„
58.55kg
“). The measured weight will be
displayed for about 10 seconds, then the
display will turn off.
kg
kg
