Orava DVD-405, Инструкция по эксплуатации, Страница: 43 / 46

43
EN
When playing Dolby audio tracks
Digital is a surround effect difficult
audible.
, Check the speaker connections and
settings.
, Depending on the DVD, the output signal
may not be recorded for all 5.1 output
channels. The signal can be mono or
stereo, even if the audio track is recorded
in Dolby Digital format.
When playing Dolby Digital or MPEG
audio, the surround effects are
difficult to hear.
,
Check the connections and settings
speakers.
,
Depending on the DVD, the output signal
may not be recorded for all 5.1 output
channels. The signal can be mono or
stereo, even if the audio track is recorded
in Dolby Digital or MPEG audio.
The sound is only output through the
center speaker.
, Depending on the disc may be
sound reproduced only through the
center speaker.
Operation
The remote control does not work.
, There are obstacles between the remote
control and the unit.
, The distance between the remote and the
unit is too far.
, You are not pointing the remote to the
remote sensor on the unit.
, The batteries in the remote control are
low.
The disc does not play.
, There is no disc inside.
, The disk is the other way around.
Place the disc correctly on the disc tray,
with the playback side down.
, The disc is distorted.
, Moisture has condensed inside the unit.
Remove the disc and leave the device
turned off for about half an hour. Turn on
the unit again before playing a disc.
The unit automatically plays the disc.
, The DVD has an auto play function.
Playback automatically stops.
, Some discs have an automatic signal
interruption function. When playing such
a disc, the unit stops playback when the
corresponding auto-interrupt signal is
reached.
Can’t change audio language.
, They are not recorded on the DVD
multilingual audio tracks.
, Changing the track language is not
available on the disc.